Sleeved LS Swap spark plug wires with angled 45 degree spark plug boots
These wires are designed to work with LS1 LS2 LS3 LS6 LS7 LS9 needing 45 degree ends. Ton's performance wires are built with a spiral wound alloy conductor with a high dielectric insulator, fiberglass braid, followed by two layers of silicone jackets to protect against heat and tears. Ton's is one of very few companies that offers custom wires for many different applications in the aftermarket motorsports world.
Note: Throughout the years GM Trucks & SUV's have used different part number coils and locations. Some require a longer 11" wire, and some use our shorter 10" wire. Please verify which wire you have prior to ordering. Custom lengths and angles are also available. Please send us an email at email@example.com for more information.
- 10mm Plug Wire Size / 17mm outer diameter sleeve
- Offers low 500 Ohms per foot resistance while maintaining very high noise suppression
- 600 degree rating wire / 1300 degree rating sleeve protection
- Works great for those needing 45 degree ends to avoid header contact (9.5" or 10.5" length terminal to terminal or about 10" or 11" length overall)
- 45 degree plug ends to avoid header contact and angled closer to coils.
- 8 piece set assembled
- 4.8L, 5.3L, 6.0L, 6.2L Engines